Filter
Top Products
System Utilities 2-17
DOS Flash Utility 0
Perform the following to use the DOS Flash Utility:
1. Press F2 during boot to enter Setup Menu.
2. Select Boot Menu to modify boot priority order.
Example: If using USB HDD to Update BIOS, move USB HDD to position 1.
Figure 2-14. BIOS Boot
3. Copy ZQR_101.exe to a bootable USB HDD.
4. Insert the USB HDD and reboot computer.
5. Execute ZQR_101.exe to update BIOS. Flash process begins as shown in Figure 2-15.
6. Flash is complete when the message, Flash Programming Complete is shown.
System will restart automatically when finished.
NOTE:
NOTE:
If AC power is not connected, the following message is shown (Figure 2-15). Plug
in the AC power to continue.
Figure 2-15. AC Power Warning