Filter
Top Products
Chapter 3 43
Removing the WLAN Modules
1. See “Removing the Battery Pack” on page 36.
2. See “Removing the SD Dummy Card” on page 37.
3. See “Removing the DIMM Module” on page 38.
4. See “Removing the Back Cover” on page 39.
5. See “Removing the Hard Disk Drive Module” on page 40.
6. Disconnect the black antenna cable from connector #1 and the white antenna cable from connector #2 on
the short wireless board module.
7. Remove the one screw (F) securing the short wireless board module to the system.
8. Detach the short wireless board module from the WLAN socket.
Size (Quantity) Color Torque Part No.
M2 x L4 (1) Silver 1.6 kgf-cm 86.9A552.4R0