Filter
Top Products
Chapter 3 - BIOS Utility 3-27
6.
After setting the password, highlight the Set or Change Password option.
7.
Press
to return to the System Security screen.
8.
Press
to return to the main menu.
9.
Press
to exit the BIOS utility. A dialog box appears asking if you want to
save the CMOS data.
10.
Select
Yes
to save the changes and reboot the system.
11.
After rebooting, turn off the system then open the housing.
12.
Set switch 1 of SW1 to
Off
to enable the password function.
The next time you want to enter the BIOS utility, you must key-in your Setup
password.
Changing or Removing the Setup Password
Should you want to change your setup password, do the following:
1.
Enter the BIOS utility and select System Security.
2.
Highlight the Setup Password parameter and press
or . The Setup
Password menu appears.
3.
From the Setup Password menu, highlight the Set or Change Password option.
4.
Enter a new password.
5.
Press
to return to the System Security screen.
6.
Press
to return to the main menu.