Filter
Top Products
Chapter 3 81
Removing the LCD Module
1. See “Removing the Battery Pack” on page 62.
2. See “Removing the Lower Cover” on page 64.
3. See “Removing the WLAN Board Modules” on page 68.
4. See “Removing the Middle Cover and the Power Board” on page 78.
5. See “Removing the Keyboard” on page 79.
6. Remove the acetic tape and disconnect the LCD coaxial cable from the LCD1 connector on the main
board.
7. Remove the internal microphone cable from the INTMIC1 connector on the main board and release the
cables from the latches.