Filter
Top Products
Chapter 2 41
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press
m during POST (when “Press <F2> to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
Phoenix TrustedCore(tm) Setup Utility
CPU Type :
AMD Turion(tm) 64 X2 Mobile Technology TL-60
CPU Speed :
Serial Number : XXXXXXXXXXXXXXXXXXX
Asset Tag Number :
Product Name :
Manufacturer Name : Acer
UUID :
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
F1 Help Select Item F5/F6 Change Values F9 Setup Defaults
Esc
Exit
Select Menu Enter Select Sub-Menu F10 Save and Exit
IDE1 Model Name :
ST9100824AS-(S1)
IDE1 Serial Number
:
3PLOLL40
2.00 GHz
Information
Main Advanced Boot ExitSecurity
VGA BIOS Version :
5.73.22.47.02
ATAPI Model Name :
TSSTcorpCD/DVDW TS-L632D-(SS)
System BIOS Version : V1.14
KBC Version : 08.16
System Utilities
Chapter 2