Filter
Top Products
Chapter 3 85
5. Carefully pry up the Antenna pad, as shown, and remove the pad from the LCD Module.
IMPORTANT: A strong adhesive is used to secure the Antenna pad in place. Take care not to bend the pad during
removal.
6. Lift all the adhesive strips securing the white and black WLAN Antenna cables in place and remove the cable
from the cable channel.
7. Carefully pry up the Antenna pads, as shown, and remove the pads from the LCD Module.
IMPORTANT: A strong adhesive is used to secure the Antenna pads in place. Take care not to bend the pads
during removal.