Filter
Top Products
45
4 Install the hot-plug cage.
(1) Slide the cage into the chassis. The cage is locked to the chassis
with an audible click.
5 Connect the following cables to their corresponding connectors on
the SATA RAID backplane board, mainboard and adapter:
(1) Attach the SATA data cable to the SATA HDD connector on the
backplane board (1), then connect the other end of the cable
to the SATA connector on the SATA RAID controller.
Note: SATA connectors on the controller are keyed. Make sure the
SATA data cables are properly connected to its corresponding
connectors on the SATA RAID controller.