Filter
Top Products
3 System upgrade
60
To remove the HSF assembly:
Important: Before removing a CPU from the mainboard, make
sure to create a backup file of all important data.
1 Observe the ESD precautions and pre-installation instructions
described on page 33.
Warning! The heat sink becomes very hot when the system
is on. NEVER touch the heat sink with any metal or with
your hands.
2 Disconnect the CPU fan cable from its mainboard connector.
3 Disengage the retaining clip from the heat sink base (1).
4 Release the clips from the tab on the heat sink base (2).
5 Pull the heat sink fan assembly away from the CPU (3).
6 Place the heat sink fan assembly upside down on a flat surface.
Note: Wipe off the thermal grease from both the heat sink-fan
assembly and CPU using an alcohol pad.