Filter
Top Products
21
Standard CMOS Features
Select standard CMOS features from the main menu to configure some basic
parameters in your system the following screen shows the standard CMOS
features menu:
The following table describes the parameters found in this menu.
Parameter Description Options
System Date Set the date following the weekday-month-day-year format.
System Time Set the system time following the hour-minute-second format.
Primary IDE Master/Slave
Secondary IDE Master/Slave
Third IDE Master/Slave
Allows you to configure the hard disk drive connected to the master port of
IDE channel. To enter the IDE Master or Slave setup, press [Enter]. The IDE
CD-ROM is always automatically detected.
IDE BusMaster When enabled, BIOS uses PCI bus-mastering for
reading/writing to IDE drives.
Enabled
Disabled
Drive A The category identifies the types of floppy disk drive A
that has been installed in the computer..
Disabled
720 KB 3.5 inch
1.44 MB 3.5 inch
2.88 MB 3.5 inch
Not Detected