Filter
Top Products
23
Quick Power On Self
Test
This feature allows the system to skip certain tests while booting.
When this function is enabled, it will decrease the time needed to
boot the system, which means to quick power on self test
function
Enabled
Disabled
Quiet Boot When enabled, the BIOS splash screen displays during startup.
When disabled, the diagnostic screen displays during startup.
Enabled
Disabled
Boot Up NumLock
Status
Sets the NumLock status when the system is powered on.
Setting to On will turn on the NumLock key when the system is
powered on. Setting to Off will allows users to use the arrow keys
on the numeric keypad.
On
Off
APCI Mode This item allows you to enable or disable the APIC (Advanced
Programmable Interrupt Controller) mode. APIC provides
symmetric multi-processing (SMP) for systems.
Enabled
Disabled
1st/2nd/3rd Boot Device Specifies the boot order from the available devices. Hard Disk
DVD
Removable
Hard Disk Drive Press Enter to access the Hard Disk Drive Priority submenu and specify the boot
device priority sequence from available hard drives.
CD/DVD Drive Press Enter to access the Removable Device Priority submenu and specify the boot
device priority sequence from available removable drives.
Boot Other Device When it is enabled, the system searches all other possible
locations for an operating system. If it fails to find on in the
devices specified under the first, second, and third boot devices.
Yes
No