Filter
Top Products
52 Chapter 4
Miscellaneous
CMOS
Settings
Wrong
CMOS settings are invalid. This error can be resolved by using AMIBIOS Setup.
CMOS
Checksum
Bad
CMOS contents failed the Checksum check. Indicates that the CMOS data has been
changed by a program other than the BIOS or that the CMOS is not retaining its data due to
malfunction. This error can typically be resolved by using AMIBIOS Setup.
Message
Displayed
Description
KBC BAT Test
failed
Keyboard controller BAT test failed. This may indicate a problem with keyboard controller
initialization.
Keyboard
Error
Keyboard is not present or the hardware is not responding when the keyboard controller is
initialized.
PS2 Keyboard
not found
PS2 Keyboard support is enabled in the BIOS setup but the device is not detected.
PS2 Mouse
not found
PS2 Mouse support is enabled in the BIOS setup but the device is not detected.
Keyboard/
Interface Error
Keyboard Controller failure. This may indicate a problem with system hardware.
Unlock
Keyboard
PS2 keyboard is locked. User needs to unlock the keyboard to continue the BIOS POST.
System Halted The system has been halted. A reset or power cycle is required to reboot the machine. This
message appears after a fatal error has been detected.
<INS>
Pressed
Indicates that <INS> key is pressed during the BIOS POST. The POST will load and use
default CMOS settings.
Password
check failed
The password entered does not match the password set in the setup. This condition may
occur for both Supervisor and User password verification.
Unknown
BIOS error.
Error code =
004Ah
This message is displayed when ADM module is not present in the AMIBIOS8 ROM.
Unknown
BIOS error.
Error code =
004Bh
This message is displayed when language module is not present in the AMIBIOS8 ROM.
Floppy
Controller
Failure
Error in initializing legacy Floppy Controller.
Message
Displayed
Description