Filter
Top Products
BIOS utility - 67
BIOS UTILITY
The BIOS utility is a hardware configuration program built into your
computer's BIOS.
Your computer is already properly configured and optimized, and you do
not need to run this utility. However, if you encounter configuration
problems, you may need to run it.
To enter the BIOS utility, do the following:
• Ensure your computer is completely powered off (See "Turning your
computer on and off" on page 15). Press and hold the Volume Up key
and then press the Power button. Release both buttons.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then
select the Boot option in the left pane. Under "Boot priority order", change
the sequence as desired.
Setting passwords
To set a password on boot, activate the BIOS utility, then select Security
from the left pane. Under "Set Supervisor Password", select Enter. Enter
your desired password and select OK. Under "Password on Boot:", set the
option to Enabled.