Acer P5271 Projector User Manual


 
P5271/P5290/P5390W/P5271i
Condential
4-6
Full screen
1280 x800@75H (for P5390W)
- Test Pattern: Blue 60
Inspection item - Dark blemish check.
Criteria - The dark blemish should be no more than 10
under blue 60 pattern.
- Ref. Defect specication table
6. Focus Test
Procedure - Test equipment: video generator
- Test signal: analog 1024 x 768@60Hz (for
P5271/P5290/P5271i);
1280 x800@75H (for P5390W)
- Test Pattern: Full screen
Inspection item - Focus check
Criteria - From screen 2 M via visual to check the
focus, look at the entire screen, focus shall
be clear, crisp, and sharp over the entire surface
of the display pattern. (Blur word on one of the
corner after adjustment is acceptable. However,
the word should at least be recognizable.)
7. Color Performance
Procedure - Test equipment: video generator.
- Test signal: 480p, 720p, 1080p
- Test Pattern: Master, 64 gray RGBW or
SMPTE bar
* Please refer to 4-2 to get into service mode. Use
720p & 1080p signal, master pattern to do HDTV
test. Color cannot discolor to purple and blue.
Inspection item - Check if each color level is well-functioned.
- Color saturation
Criteria - Screen appears normal. It should not have any
abnormal condition, such as lines appear on the
screen and so on.
- Color appears normal.
- It is unacceptable to have few lines ashing.
- RGBW should all appear normal on the screen
and sort from R -G-B-W.
- Color levels should be sufcient and normal.
(The unidentied color levels on both left and
Blue 60
Master
SMPTE BAR
64 gray RGBW