Filter
Top Products
61
Note: Press the attention button again within five seconds to
abort the hot-plug operation.
3 Make sure that the power LED on the rear of the PCI slot is turned
off before disconnecting any cables attached to the card.
4 Open the yellow caution plate (A).
5 Rotate the slot retention latch on the rear of the card slot upward
(B).
6 Release the vertical edge of the card and pull it away from the
chassis (C).
7 Store the card in an antistatic protective wrapper.
8 If installing a new PCI card, see “To install a new PCI hot-plug PCI
card” section.
9 Observe the post-installation instructions described on page 40.
PCI Caution Plate
A
B
C
PCI Add-in Card