Filter
Top Products
48 Chapter 3
1. Remove the four screws to detach the panel cover from panel moudle.
2. Detach the cover from the panel.
.
3. Remove the two screws on both sides that fasten the LCD bracket.
4. Disconnect the backlight cable and wireless cable from the invertor board.
5. Detach the LCD panel.
6. Remove the four screws on each side to release the panel bracket.
7. Disconnect the coaxial cable.
8. Remove one screw.
9. Detach the invertor board from the position.
10. Remove the two screws to release the anntenna.