Filter
Top Products
X1160 Series/X1260 Series/X1160Z Series/X1260K Refresh Condential
2-1
Chapter 2
Disassembly& Assembly Process
2-1 Equipment Needed & Product Overview
1. Screw Bit (+) :107
2. Hex Sleeves 5mm
3. Screw Bit (+) :102
4. Screw Bit (-) :102
5. Long Nose Nipper
6. Tweezers
7.
X1160/X1160 refresh/X1260/X1260 refresh/X1160Z/X1160Z refresh/X1260K refresh
unit
* Before you start: This process is protective level II. Operators should wear electrostatic chains.
* Note: 1.If you need to replace the main board, you have to get into service mode and record the
lamp usage hour. please refer to section 2-18.
2.The disassembly and assembly process for X1160 Series/X1260 Series/X1160Z Series/
X1260K Refresh is the same. Here, we take X1160/X1260 as example.