Acer XD1280 Projector User Manual


 
11
... English
Installation
Power
Powering On the Projector
1. Removethelenscap.
2. Ensurethatthepowercordandsignalcablearesecurely
connected.ThePowerLEDwillash
red
.
3. Turn on the lamp by pressing “Power” button on the control
panel.
AndthePowerLEDwillturn
blue
.
4. Turnonyoursource(computer,notebook,videoplayer
,etc.).Theprojectorwilldetectyoursourceautomatically.
If the screen displays “No Signal”, please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, using the
“Source” button on the remote control or control panel to
switch.
Powering On/Off the Projector
Turn on the projector
rstandthenthesignal
sources.
1