Acer XD1280 Projector User Manual


  Open as PDF
of 47
 
33
... English
Appendices
Troubleshooting
Ifyouexperiencetroublewiththeprojector,refertothe
followinginformation.Iftheproblempersists,please
contact your local reseller or service center.
Problem: No image appears on screen.
Ensureallthecablesandpowerconnectionsarecorrectlyand
securely connected as described in the “Installation” section.
Ensurethepinsofconnectorsarenotcrookedorbroken.
Check if the projection lamp has been securely installed. Please
refer to the “Replacing the lamp” section.
Make sure you have removed the lens cap and the projector is
switched on.
Ensurethatthe“Hide”featureisnotenabled.
Problem: Partial, scrolling or incorrectly displayed image.
Press the “Resync” button on the Remote Control.
If you use a PC:
Iftheresolutionofyourcomputerishigherthan800x600.Follow
the steps outlined below to reset the resolution.
For Windows 3.x:
1. IntheWindowsProgramManager,clickthe“WindowsSetup”
icon in the Main group.
2. Verify that your display resolution setting is less than or equal
to800x600.
ForWindows95,98,2000,XP:
1. Open“MyComputer”icon,the“ControlPanel”folder,and
then double click on the “Display” icon.
2. Select the “Setting” tab.
3. Inthe“DesktopArea”youwillndtheresolutionsetting.
Verifythattheresolutionsettingislessthanorequalto800x
600resolution.
If the projector is still not projecting the whole image, you will
also need to change the monitor display you are using. Refer to
the following steps.
 previous next