Filter
Top Products
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7130
1U Rackmount System
Installing the System into a Rack
(Rack hardware optional)
This section provides information on installing the Acnodes RMC7130 into a rack unit. If the system has
already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6.
Basic Installation Procedure
The RMC7130 server comes with two rack mounting brackets, which are located on each side at the
front of the chassis. To mount the system into a rack, simply screw these brackets directly to the front of
the rack (two screws for each bracket).
Installing with Rackmount Kit
This section is only for customers that have the optional rack mount kit (CSE-PT8). Each of these as-
semblies consist of two sections: an inner rail that secures to the chassis and an outer rail that secures
directly to the rack itself (see Figure 2-1).
This is a guideline for installing the unit into a rack with the optional rack kit. You should also refer to the
installation instructions that came with the rack unit you are using. Be aware that there are a variety of
rack units on the market, which may mean the assembly procedure will differ slightly.