Filter
Top Products
11
Configuring
the Adapter
This chapter explains how to configure the Adapter, including changing the IP
address, setting up security, and creating a password. The Adapter can be config-
ured through the Configuration Utility provided on the Utility CD (using a com-
puter), or through an internet browser via the Web Configurator.
Using the Configuration Utility
The Configuration Utility allows the user to view or modify various settings of the
Adapter, including configuring security, changing the IP address, and checking the
link status.
Installing the Utility
To install the Configuration Utility
1. Insert the Adapter’s Utility CD in the CD-ROM drive of a computer.
2. The installation should start automatically. If not, from the computer’s desk-
top, click Start, then select Run. Type d:\C123.exe (where “d” is the drive
letter of the computer’s CD-ROM drive). Click OK.
3. When the following screen appears, click Finish.
The Configuration Utility is installed on the computer and ready to use.
4