ACTiSYS ACT-IR100M Network Card User Manual


 
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP
3 SYSTEM REQUIREMENTS
To use ACT-IR100M+/IR100M/IR100MP, you MUST meet the following requirements.
Your PC which using passing through:
A Centronics parallel port.
A cable connecting your PC Centronics port and IR100M+/IR100M/IR100MP Centronics 36F port.
A printer which is within ACTiSYS IR100M+/IR100M/IR100MP compatibility list.
Proper printing software and proper printer driver on your PC.
Window 95/98/ME/2000/XP.
110V/220 AC electrical outlets if ACT-IR100M+ or ACT-IR100M.
Your Mobile Device which using infrared:
A infrared port which is compliant IrDA 1.0.
A printer which is on ACTiSYS IR100M+/IR100M/IR100MP compatibility list.
Proper printing software and proper printer driver on your mobile device. We recommend ACTiPrintCE for
Window CE and ACTiPrintPalm for Palm OS.
Windows CE 3.0 or above if your mobile device’s OS is Window CE.
Palm OS 3.2 or above if your mobile device’s OS is Palm OS
Windows 95/98/ME/2000/XP if you mobile device is Laptop PC
110V/220V AC electrical outlets if ACT-IR100M+ or ACT-IR100M.
A Parallel Printer which is compliant with Centronics protocol and Centronics-B (DB36) connector.
Note: If a printer states to support DOS, it complies Centronics protocol.
Release 3.2, August 20, 2003 10
© Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved