Filter
Top Products
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP
Figure 5. Align Diagram
Setting Up Your Printer/IR100M+/IR100M/IR100MP/PC (If you use the pass through function)
1. Turn Off both your computer and printer.
2. Connect ACT-IR220L+ to ACT-IR100M+ only if you have IR100M+.
3. Connect your printer and ACT-IR100M+/IR100M/IR100MP.
4. Connect your ACT-IR100M+/IR100M/IR100MP and PC by printer cable ( If you use the pass through
function)
5. Plug the AC adapter to the electrical outlet if external power supply need.
6. Plug the AC adapter to IR100M+/IR100M. The red LED on IR100M will be on, but the LED on IR100MB
is still off.
7. Turn on your printer.
8. Add a new printer on Printers, set the Local Printer/LPT1 and choose proper printer driver (if you use
pass through). For details, see Windows Printer Setting.
9. Print by Windows application’s Print (pass through). The parallel LED on the top of IR100M will flash. If
not, see Troubleshooting.
10. Turn on your mobile device.
11. Activate the infrared if necessary. For details, see mobile device manual.
12. Install proper printing software. We recommend ACTiPrintCE if your mobile device’s OS is Windows
CE 3.0 or above or ACTiPrintPalm if your mobile device’s OS is Palm OS 3.2 or above. If your mobile
device is a PC with Windows 95/98/ME/2000/XP, you can use the application’s print function. For details
about how to install the printing software, see specific application manual.
13. Set your printer setting. Set port/Infrared or virtual infrared port LPT3 and choose proper printer
driver. Different mobile devices or printing software have different methods. For detail, see the printing
software manual or Windows Printer Setting (Windows 95/98/ME/2000/XP device).
14. Align your mobile device infrared eye with IR100M+/IR100M/IR100MP IR Head (see figure 3). The LED
on IR100M+/IR100MP will flash slowly. Or the Infrared LED on the top of IR100M will flash.
15. Choose Print, the LED on IR100M+/IR100MP will be on and printer begin to print out. Or the parallel
LED on the top of IR100M will flash and printer beginning to print out. If not, see Trouble Shooting.
Release 3.2, August 20, 2003 12
© Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved