Filter
Top Products
The Wireless Connectivity Expert
ACT-IR100SD OBEX Server
User’s Manual
PRECAUTIONS
To ensure trouble-free operation, please observe the following precautions:
Optical communications are easily affected by external light sources, weak batteries, transfer
distance, transfer angle, etc.
Any of these conditions may cause a data transfer failure, incomplete or missing data. Make
sure that the wireless interface is away from direct sunlight and other strong light source.
Do not terminate arbitrarily during file transfer process between IR100SD and computers
until finished. Otherwise IR100SD internal data integrity may be damaged, which is due to
the violation of IR100SD’s.
Do not expose the unit to moisture, as this will damage the internal circuitry.
Do not expose the unit to extreme temperatures. It should not be placed in direct sunlight or
in a closed vehicle, neither should it be placed near heaters nor other heat sources.
Do not store the unit in a humid or dusty place.
Use a soft, dry cloth to clean the unit. Do not use a wet cloth or any solvent.
Do not drop the unit or handle the unit carelessly.
CAUTION:
Never touch the pins of computer connection terminal. The internal circuits can be damaged
by a static electricity discharge. If this device requires any servicing, use only an ACTiSYS
service dealer, an ACTiSYS approved service facility, or an ACTiSYS repair service.
When exchanging data with host computer, be sure the appropriate serial communication
port is available and is not in conflict with other peripheral device or software.
Copyright 2000-2006 ACTiSYS Corp.
Page 4 of 17 Oct 30, 2006
Version 1.0