Filter
Top Products
The Wireless Connectivity Expert
ACT-IR100SD OBEX Server
User’s Manual
1. FEATURES
A complete IrDA Protocol stack in a dongle.
Supports both IrDA Primary and Secondary mode, changeable via PC utility.
No driver program is needed.
Supports mandatory IrDA layer: IrPHY, IrLAP, IrLMP and IAS.
Supports upper layers TinyTP, IrCOMM, IrLPT, and OBEX PUT/GET server.
Supports host baud rate from 1.2 kbps to 115.2 kbps, which is changeable by PC utility. IrDA baud
rate from 9.6 kbps to 115.2 kbps, which is flexible setting by IrDA devices.
IR frame and Host buffer are 2048 bytes separately.
Supply voltage: 6.0 V to 12 V.
Power consumption: 20 mA standby, 50 mA active.
Supports 3 wires host interface (Tx, Rx and GND).
Interface to Host:
- Full-duplex asynchronous serial (TXD, RXD)
- Hardware flow control (RTS, CTS)
- Optional line status for link control (DTR, DSR)
- Other unused inputs (RI, CD)
- Designed for use in RS232C level and it is in DTE (Data Terminal Equipment) configuration.
Copyright 2000-2006 ACTiSYS Corp.
Page 5 of 17 Oct 30, 2006
Version 1.0