Filter
Top Products
99
99
9
To access the setup menu follow these steps:
1. Unplug the printer either at the outlet or at the back of
the printer.
2. Press and hold down the left side of the rocker switch
and plug in the printer. The printer will advance the
paper. After the paper advance has stopped, count for
3 to 5 seconds and then release the switch. The
following is printed:
If you wait less than three or more than five seconds
RR
RR
R
eady eady
eady eady
eady is printed and you will have to try steps 1 and 2
again to access the setup menu.
After you access the setup menu, if you press
NEXT NEXT
NEXT NEXT
NEXT (left
side of switch) repeatedly you will see the following list
printed. If you keep pressing
NEXT NEXT
NEXT NEXT
NEXT (left side) the list
repeats itself.
As you can see from the above printout the setup menu
contains the following items:
•
CONFIGURECONFIGURE
CONFIGURECONFIGURE
CONFIGURE menu
•
CUSTCUST
CUSTCUST
CUST
OMOM
OMOM
OM menu
•
SET CLSET CL
SET CLSET CL
SET CL
OCKOCK
OCKOCK
OCK menu
•
RESET SEQ#RESET SEQ#
RESET SEQ#RESET SEQ#
RESET SEQ#
The following pages explain these items and how to
customize the printer to your needs.
The first setup menu item reads:
CONFIGURE [NEXT/OK]CONFIGURE [NEXT/OK]
CONFIGURE [NEXT/OK]CONFIGURE [NEXT/OK]
CONFIGURE [NEXT/OK]
[NEXT/OK][NEXT/OK]
[NEXT/OK][NEXT/OK]
[NEXT/OK] is a visual clue so you know that pressing the
left side of the rocker switch will go to the
NEXT NEXT
NEXT NEXT
NEXT part of
the menu and that pressing the right side of the rocker
switch will accept (or say
OKOK
OKOK
OK to) what this line of the setup
menu says.
Accessing the SetupAccessing the Setup
Accessing the SetupAccessing the Setup
Accessing the Setup
MenuMenu
MenuMenu
Menu
CONFIGURECONFIGURE
CONFIGURECONFIGURE
CONFIGURE