Filter
Top Products
After typing RUN, your custom character will be stored in
the printer’s memory. It will retain this information until
the printer is switched off or until you write over the data
by defining a different character.
To print your newly designed character, simply send
CHR$(126) which corresponds to hexidecimal value 7E.
This control code is used when setting the printer’s time
and date clock. Following is the text string to send when
setting the clock:
This control code is used to read the printer’s time and
date clock. Following is the ASCII string received:
Sending this control code will turn off the reverse field
mode that is selected using control code 25.
Send this control code to turn on the reverse field
printing mode. This will print white letters on a dark
background. Do not print more that three reverse field
print lines. Also, do not print more than a few empty
spaces in a reverse field. The printer may become
overloaded and stop printing.
Set Time and DateSet Time and Date
Set Time and DateSet Time and Date
Set Time and Date
Control Code 20Control Code 20
Control Code 20Control Code 20
Control Code 20
Read Time and DateRead Time and Date
Read Time and DateRead Time and Date
Read Time and Date
Control Code 22Control Code 22
Control Code 22Control Code 22
Control Code 22
Cancel Reverse FieldCancel Reverse Field
Cancel Reverse FieldCancel Reverse Field
Cancel Reverse Field
Control Code 24Control Code 24
Control Code 24Control Code 24
Control Code 24
2323
2323
23
Reverse Field ControlReverse Field Control
Reverse Field ControlReverse Field Control
Reverse Field Control
Code 25Code 25
Code 25Code 25
Code 25