Filter
Top Products
41
Troubleshooting
3 Select an Access Point, then click Connect.
If a link is made, the Adaptec Wireless Utility icon turns green
(see page 30) and the Link LED on your Wireless USB Adapter
lights up.
If no link is made, click the Link tab. If the Link Quality or
Signal Strength values are lower than 25 percent, it’s unlikely
that you’ll be able to connect to that AP.
Click Re-Scan to search for other available APs and repeat Step
3 if possible.
You may need to reposition your computer so that your
Wireless USB Adapter is closer to an AP.
4 Click OK to close the Adaptec Wireless Utility.