Filter
Top Products
11
Troubleshooting
WINDOWS 95 Troubleshooting
■
I can read from my CD-R or CD-RW but Easy CD Pro doesn’t
recognize the drive, therefore I’m unable to write to the CD?
Please check the revision of Easy CD Pro. Adaptec has fixed
problems in their latest revision (2.11C). This is found on their
website:
http://www.adaptec.com/support/files/upgrades.html
The file you need is Easy2up.exe, and is found under the
section
CD recordable software upgrades PC
.
■
In the Device Manager under SCSI controllers the MiniSCSI
1350 controller is recognized but the CD drive isn’t listed
under CD-ROM.
Please check that you are using the very latest installer from
Adaptec. Also, check the SCSI ID of the CD ROM, make sure it
is not ID 7, 1 or 0.
■
Can I use FDISK to prepare my hard disk?
In order to partition a hard disk drive with the FDISK
command, Int 13h support has to be enabled. For instructions
on how to do this refer to Formatting your hard disk drives in
Windows 95 on page 13.
■
My EPST connection is running in Nibble mode, what
should I do?
At present EPST doesn’t support the parallel mode ECP
properly. If you change the port mode to EPP you will find a
performance increase.