Filter
Top Products
20 PCM-3420 User's Manual
System Requirements for Full Installa-
tion
l A 386-based PC or higher with at least 4Mbytes of memory , 10MBytes of
free disk space , and a 3.5-inch floppy drive
l An ASPI-compliant SCSI host adapter (like PCM-3420) and a CD-ROM
drive
l Microsoft Windows 95 , Windows NT version 3.51 or above , Windows
3.1x, Windows for Workgroups 3.1x, or DOS 6.x or above.
Quick Start Instructions
First, install your PCM-3420 host adapter and other SCSI devices (see
chapter 2) . Then follow the instruction for your operating system
software in one of the following sections.
We recommend that after you install EZ-SCSI you can SCSI Tutor to
learn more about the features of SCSI.
Windows 95 or Windows NT
If you want to install Windows 95 or Windows NT on a new computer
system , you may not be able to access your SCSI CD-ROM drive first
. (Usually, you install Windows 95 or Windows NT from a CD-ROM
disc.) To gain access to your CD-ROM device , follow the DOS Quick
Start instruction section . Then reboot your computer and follow these
instructions:
1.Install Windows 95 or Windows NT version 3.51 or above, and start
it running on your computer.
2.Insert the EZ-SCSI Diskette in your floppy disk drive.
3.Click the Start button and select Run.
4.Type a:\setup if you are using the A drive or b:\setup if you are
using the B drive. Then click OK.
5.Following the instructions that appear on the screen.