ADC 310F Network Card User Manual


 
Chapter 5: Monitoring Circuit Status and Displaying System Information
Megabit Modem 310F and 320F User Manual 41
DISPLAYING SYSTEM INFORMATION
The System Information screen provides general product information, such as hardware serial
numbers and software revision numbers.
1 From the Main Menu (page 11), type to open the System Menu.
2 From the
System Menu, type to display the System Information screen. This screen
provides the information described in the table below.
Information Description
Modem
Product Number The ADC 150 part number for the modem.
Software Rev The version number of the software that is installed on the modem.
PROM Checksum The number that is used to verify that the compiled code is valid.
History
Day in Operation The number of days that the modem has been in operation. The
number of days is stored in non-volatile memory and retained even
when the modem is power off and on again. The day increments
when the time increases past 23:59:59 - 00:00:00.
1
1
07/20/99 PAIRGAIN TECHNOLOGIES 04:08:13
ATU-C ADSL MEGABIT MODEM TERMINAL v 1.0
SYSTEM INFORMATION
ATU-C ATU-R
MODEM PRODUCT NUM 150-2103-01 150-2102-01
SOFTWARE REV 1.0 1.0
PROM CHECKSUM 6C01 BC9D
HISTORY DAYS IN OPERATION 125 125
(R)eturn (M)ain
ENTER CHOICE-->