Filter
Top Products
Local Configuration LTPS-UM-8013-03
28 August 30, 2002 D3LX CO and RMT Modules
VIEWING LOOPBACK STATUS AND
P
ERFORMING LOOPBACK COMMANDS
Use this procedure to view loopbacks and send loopback
commands for a specific D3LX system.
1 From the Main menu, select 6. System Maintenance.
2 From the System Maintenance menu, select
4. Loopback Status Commands.
3 From the Loopback Status/Commands menu, select 1. High/Low Speed Loopback
Status/Commands (as shown in Figure 16) to view the status of current loopbacks and to enable new
loopback tests for low-speed modules and their associated components.
4 Use , , , ,
and to select the group and slot to display, populate each data field according
to your requirements, then assign the selections by pressing .
Figure 16. Loopback Status and Commands
6. System Maintenance
4. Loopback Status Commands
1. High/Low Speed
tatus Commands
Loopback
S
SPACEBAR
← →
↓ ↑
ENTER