Filter
Top Products
AdderView USB Installation and Use Page 26
Your monitor will plug directly into the back of the AdderView, however if you wish to
extend the distance between the AdderView and the monitor then you may use a tri-
coax video extension cable. This cable should preferably be no longer than 10
metres although cable runs up to 20 metres long may also give acceptable video
quality.
A3. PS/2 style keyboard and mouse extension cables
PS/2 style keyboards and mice will plug directly into the AdderView USB model
AV4USB-PC. If required the keyboard and mouse may be located further away from
the AdderView with the aid of extension cables. Extension cables should be
terminated with 6 pin mini-DIN PS/2 style connectors, with a male connector on one
end and a female connector on the other end. All pins on the extension cable should
be wired straight through (1 to 1, 2 to 2, 3 to 3 etc.). Such extension cables may be
up to 10 metres long. Most keyboards and mice will also work with a 20 metre
extension cable.
A4. Remote controller extension cables
The remote controller is supplied as standard with a 3 metre long lead. This distance
may be extended with the use of suitable shielded extension cable. This extension
cable may be up to 20 metres long and should be wired so that all pins are
connected straight through (1 to 1, 2 to 2, 3 to 3 etc.). Remote controllers with longer
leads are also available from your supplier.