Filter
Top Products
EchoView - Wireless Video Adapter Manual Version 0.3
13
5 Troubleshooting
Be sure your PC is on and it’s not standby or hibernate mode. In addition, make sure the PC’s
wireless network interface is enabled and it supports either 802.11g or 802.11b specification.
If your display monitor does not show Addlogix splash screen
! Make sure the wireless video adapter is firmly connected to the display monitor.
! Please check the power adapter is connected. If you don't use the included power adapter,
then please be sure that the DVI connector of your display monitor supplies sufficient power.
If you cannot download and install wireless video adapter software driver and application
! Please refer to section 2, Configuration and Setup and configure your PC accordingly.
! Be sure you have selected the correct wireless network, i.e. AddLogix-XXXX.
! Click Download link on the Addlogix webpage and click Run to begin software installation
process.
If your connection to the wireless video adapter is intermittent
! Make sure the wireless video adapter is not placed nearby a wireless network router.
! Try changing the AddLogix wireless video adapter’s channel in network settings.
1. Click Settings on the main wireless video application window.
2. In the Settings window, click Network Settings and use the drop down menu to select a
different channel.
! Be sure your wireless video adapter is located at a reasonable distance between the PC.
Please refer to 802.11b/g standards for more information.