Filter
Top Products
PCMCIA Installation for Windows NT
1. Go to Start\Settings\Control Panel
2. Double Click SCSI adapter icon
3. Click on the Driver Tab
4. Click Add to add new driver
5. Follow wizard and browse to A:\NT folder for the Driver.
6. Select “Addonics PCMCIA…” then click ok.
7. Windows will prompt you for driver location again, to continue
Type in A:\NT then click continue.
8. Click YES to restart your computer.
PCMCIA Installation for Windows 2000 and XP
1. Make sure your computer is up and running
2. Verify that all cables are connected.
3. Insert the PCMCIA cable to the PCMCIA socket.
4. A "New Hardware Found" message shall pops up.
5. Select "Next" to continue installation.
6. Select "Search for a suitable driver...." button and select "Next".
7. In "select a Device Driver page", user can choose either
"PCMCIA ATA/ATAPI Controller" that shall install the default driver
Or user can select "Have Disk" to specify location.
8. Enter path like "a:\win2kXP".
Select either "Addonics PCMCIA...." click yes for the warnings and Let
The Operating system finish the installation and that's it.
Addonics Technologies – Pocket CD-ROM Users Guide v 5.0
10