Filter
Top Products
Firewire CD-ROM Installation
For Win98SE, Me, Win2000, XP
Note: (for Windows 98 SE only)
After plugging in the cable some system might prompt you for Win98SE CD, in
case you don’t have The Win98SE CD and the wizard prompt you for
a. NTMAP.SYS please type C:\WINDOWS\SYSTEM32\DRIVERS
b. NTMAPHLP.PDR please type C:\WINDOWS\SYSTEM\IOSUBSYS
1. Make sure the Firewire cable is securely attach from the back of the drive.
2. When External power is attach to the drive make sure that the switch on the
Back of the drive is set to AC/DC.
3. Power on the system
4. On the Window Desktop, double click on the MY COMPUTER icon.
5. Plug the FIREWIRE-IDE cable’s “FIREWIRE Connector” (Picture 1) into
Your computer’s FIREWIRE port.
6. Wait for a few seconds, your computer may blink for a moment as well.
7. If all is well you should see a CD-ROM icon under my computer.
8. You may now access your CD-ROM drive.
Addonics Technologies – Pocket CD-ROM Users Guide v 5.0
6