Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
For Direct mode:
Once the Duplicator has analyzed the source device, it will scan for
suitable target devices. While examining connected targets, the port's green
LED will blink. If the device is suitable, the green LED will glow. If the device
is unsuitable, the red LED will glow. The Display will show how many targets
are ready.
Press OK once all of the targets are ready to begin copying. The
green LEDs will blink to indicate activity. Once copying is complete for a
target, the green LED will glow to indicate copy succeeded or the red LED
will glow to indicate the copy failed.
For Asynchronous mode (default):
Once the Duplicator has analyzed the source device, it will scan for
suitable target devices. While examining a target device, the green LED will
blink. If a target device is suitable, the green LED will continue to blink and
the copy process will begin immediately. When a target is finished, the green
LED will glow to indicate the copy succeeded, or the red LED will glow to
indicate the copy failed.
Once a target device's port LED is glowing green or red, the device
may be removed and another inserted in its place. The new device will be
examined and copying will proceed. The LCD Display will show an ongoing
tally of devices that passed and failed the copy process.
Duplicator Functions
The Duplicator menu has three sections: Main Menu, and Utility and Setup
which are accessed as Main Menu Items 6 and 7.
Main Menu
1. Copy
Performs the Copy process as described in the Quick Start section. When
the Copy function is on the menu display, it also shows the current setting for
the Copy Area function in the Setup Menu: (Data) for the “System and Files”
setting, or (Whole) for the “Whole Media” setting. For details, see 7.2. Copy
Area.
2. Compare
Performs a full comparison between the target devices and the source
device.