Filter
Top Products
61200.153L1-13 Express XR/XRT Quick Start Guide 17
Chapter 2. Installation
10. Click NEXT to use Automatic SPID and Switch Detection
or enter the Switch Type and service profile IDs (SPIDs)
provided by the telephone company.
11. Check the Auto-detect SPIDs/Switch Types option.
12. Click NEXT.
13. Choose the factory profile closest to your particular applica-
tion. The Preview button can be used to view these settings.
14. Click NEXT.
15. To change the profile name for future reference select the
Change Profile name option and enter a new name. Other-
wise, the default name shown on the screen is used. Ensure
the telephone cable between the Express XR/XRT ISDN
connector and the walljack is connected before proceeding.
16. Click Finish. The Auto-Detecting Service Profile IDs
screen is displayed while the Automatic SPID and Switch
algorithm executes.
After installation is complete the Express XR/XRT is ready for
use. If any error screens are encountered or the unit remains at
Link Down for longer than 15 minutes, see the chapter Trouble-
shooting.
Auto-Detect SPIDs/Switch Type
Auto-detection of SPIDs and Switch Type greatly reduces the
likelihood of time-consuming problems occurring during
installation of the Express XR/XRT. It evaluates common SPID
formats based on the area code and phone numbers and reports
success after placing a test call.
After installation is complete, the Express XR/XRT resets the ISDN
line for a clean start. Therefore, the PWR/LINE LED may not be on
solid (indicating link up) for a few more seconds.
In the few cases where the procedure does not succeed, the
nonstandard SPIDs may be entered at Step 10 of the preceding
procedure (Using the Express Configuration Wizard).
Using the Express Configuration Wizard Help
On-line help is available by clicking the Help button displayed
in the Configuration screen. On-line help provides detailed
information regarding such features as creating a custom profile,
defining a user button, remote configuration, and testing.