Filter
Top Products
Appendix A. AT Commands and S-Registers
62 Express XR/XRT Quick Start Guide 61200.153L1-13
3 = Hardware
12 = Software
SS77 REMOTE............. Numeric password string for remote
NUMERIC configuration.
PASSWORD
The following are the string locations for stored numbers 0 - 9:
SS80 SN0 LOC............. Stored number 0 string
SS81 SN1 LOC............. Stored number 1 string. Used for second
number dialed in a multilink connection.
SS82 SN2 LOC............. Stored number 2 string
SS83 SN3 LOC............. Stored number 3 string
SS84 SN4 LOC............. Stored number 4 string
SS85 SN5 LOC............. Stored number 5 string
SS86 SN6 LOC............. Stored number 6 string
SS87 SN7 LOC............. Stored number 7 string
SS88 SN8 LOC............. Stored number 8 string
SS89 SN9 LOC............. Stored number 9 string
S90... CONFERENCE .. NI-1 feature identification number for
ID conferencing. See the ISDN service provider for
this ID.
S91... TRANSFER ID .. NI-1 feature identification number for transfer-
ring. See the ISDN service provider for this ID.
S93... CALL TYPE ........ Determines how incoming call is routed when
ROUTING connected to a point-to-point ISDN line.
0 = Route all call types to DTE
(XRT ONLY) 1 = Route Speech call types to POTS
2 = Route Speech and Audio call types to
POTS
S94... LOCAL TONES . Forces the POTS interface to generate all tones.
Bit 0 = 0:In-band tones from ISDN switch
(when available)
Bit 0 = 1:All tones generated locally
Bit 1 = 0:Warnings to POTS when unavailable
Bit 1 = 1:Disable all warnings to POTS
S118 . CHAP Enable ..... 32 = CHAP enabled
0 = CHAP disabled (Windows 95 setting)