Filter
Top Products
Chapter 3. Terminal Menu Operation and Structure
3-20 Express 4110/4120 User Manual 61200176L3-1
cols are not on the same network segment as the servers providing the
information, the client programs will not receive a response without
enabling the UDP relay agent.
UDP Relay/Mode
Write security: 3; Read security: 5
When this option is set to On (def), the Express 4110/4120 will act as a
relay agent.
UDP Relay/UDP Relay List
Up to four relay destination servers can be specified in this list.
UDP Relay List/Relay Address
Write security: 3; Read security: 5
This is the IP address of the server that will receive the relay packet.
UDP Relay List/UDP Port Type
Write security: 3; Read security: 5
UDP Relay List/UDP Port 1, UDP Port 2, UDP Port 3
Write security: 3; Read security: 5
UDP Port 1, UDP Port 2, and UDP Port 3 are used for specifying
UDP ports to be relayed. These fields only apply when UDP Port
Type is set to Specified.
Standard
(def)
The following standard UDP protocols are relayed
when set: DHCP, TFTP, DNS, NTP (Network Time Proto-
col, port 123). NBNS (NetBIOS Name Server, port
137), NBDG (NetBIOS Datagram, port 138), and
BootP.
Specified
When set, the UDP port (1 to 65535) can be speci-
fied in the UDP Port columns. (up to a maximum of
three per server).