Filter
Top Products
Chapter 3. Operation
61200054L2-1 Nx56/64 (EIA-530) Option Module User Manual 3-9
To display the port name and the software version in-
stalled, as shown in Figure 3-5, do the following:
1. Use the
Scroll keys to move through the available
ports, or enter the port number with the number key.
2. When the desired port name is displayed, press
Enter.
3. Press
Cancel to exit or to select another port.
Figure 3-5. Port Name and Software Version Display
2)RUN SELF-TEST, Submenu of 4)Test
This menu item is used to execute both the internal test of
the TSU 100 and of the Nx56/64 (EIA-530) option mod-
ule. This is the same test executed during power-up. The
results of the self-test are shown on the TSU 100 display.
For additional information on self-test, see Chapter 3, Op-
eration in the TSU 100 User Manual.
To activate a self-test, do the following:
1. Follow the standard operating procedure to access
the
4)TEST
menu items.
2. With the cursor on
2)RUN SELF-TEST
, press
Enter.
The TSU 100 display will show the test outcome.