Filter
Top Products
MP-11x & Microsoft Office Communications Server 2007
Quick Installation Guide 12 Document #: LTRT-26301
3.1.3 Changing Login Username and Password
It's recommended that you change the default user name and password of the Web user account
initially used to access the Embedded Web Server.
¾ To change the user name and password, take these 3 steps:
1. Open the ‘Web User Accounts’ screen (Advanced Configuration menu > Security
Settings > Web User Accounts).
Figure 3-3: Web User Accounts Screen
2. Change the user name by performing the following:
a. In the ‘User Name’ field, enter the new user name (maximum of 19 characters).
b. Click the Change User Name button; the new user name is immediately applied and
the ‘Enter Network Password’ screen appears (shown in Figure 3-1 on page 10).
c. In the ‘Enter Network Password’ screen, enter the new user name (case-sensitive).
3. Change the password by performing the following:
a. In the ‘Current Password’ field, enter the current password.
b. In the 'New Password’ and ‘Confirm New Password’ fields, enter the new password
(maximum of 19 characters).
c. Click the Change Password button; the new password is immediately applied and the
‘Enter Network Password’ screen appears (shown in Figure 3-1 on page 10).
d. In the ‘Enter Network Password’ screen, enter the new password (case-sensitive).