Filter
Top Products
Chapter 2 Installation 27
2.18.4 Panel type select (SW1)
SW1 is a 6-pin dip switch for selecting the type of panel and display
mode.
Table 2-12: Panel type select (SW1)
Panel type Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6
TFT 640 x 480 18-bit OFF ON ON ON ON -
TFT 800 x 600 18-bit OFF OFF ON ON ON -
TFT 1024 x 768 24-bit OFF ON OFF ON ON -
TFT 1024 x 768 36-bit OFF OFF OFF ON ON -
STN 640 x 480 16-bit OFF ON ON ON OFF -
STN 800 x 600 16-bit OFF OFF ON ON OFF -
STN 1024 x 768 16-bit OFF ON OFF ON OFF -
STN 1024 x 768 24-bit OFF OFF OFF ON OFF -
Default setting ON ON ON ON ON ON
Note 1: If the Pin 1 of SW1 is in the ON position, the LCD is
disconnected.
Note 2: Pin 6 is reserved for PanelLink setting.