Filter
Top Products
58
3.7.6 Suspend Type
The
choices are “Stop
Grant” and
“PwrOn Suspend”.
3.7.7 Modem Use IRQ
This
determines the IRQ that the
MODEM
can
use.The choices are “3”,
“4”, “5”,
“7”, “9”,
“10”,
“11”, and “NA”.
3.7.8 Suspend Mode
This item allows user to determine the time of system inactivity, all
devices except the CPU will be shut off.
3.7.9 HDD Power Down
This item allows user to determine the time of system inactivity, the
hard disk drive will be powered down.
3.7.10 Soft-Off by PWR-BTTN
If you
choose “Instant-Off”, then
pushing the ATX
soft power switch
but- ton once will switch the system
to
“system off” power mode. You
can choose “Delay 4 sec”. If you do, then
pushing the button
for
more
than 4 seconds
will turn
off
the
system, whereas pushing the button
momentarily
(for less
than 4 seconds)
will switch the system
to “suspend” mode.
3.7.11
PowerOn by LAN
This item
allows
you to power on
the system
by
LAN. The choices are
“Enabled” and “Disabled”.
3.7.12 CPU THRM-Throttling
This option
controlls the CPU
speed
as
a percentage of
regular power.
the choices are 87.5%,
75%, 62.5%,
50%, 37.5%, 25% .12%
and
12.5%.
3.7.13
PowerOn by Modem
To
enabled or
disable the function
to power
on the system
via a
Modem connection
from
a remote host. The choice
“Enabled” and
“Disabled”.
3.7.14
PowerOn by Alarm
The choices
are
“Enabled” and “Disabled”.
Fields that follow
below indicate
date of current
month and time of
alarm
settings, if
enabled.
3.7.15
Primary IDE 0 (1) and Secondary
IDE 0 (1)
When Enabled, the
system will resume
from suspend mode if
Primary
IDE 0 (1)
or Secondary IDE 0 (1)
becomes active.
The choices are
“Enabled” and “Disabled”.