Filter
Top Products
51 Chapter3
SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings which allow you to synchronize
switch clocks on the Internet.
• SNTP Client: Enable/disable SNTP function to get the time from the SNTP server.
• Daylight Saving Time: Enable/disable daylight saving time function. When daylight saving time is
enabled, you need to configure the daylight saving time period.
• UTC Timezone: Set the switch location time zone. The following table lists the different location time
zone for your reference.
Table 3.18: UTC Timezone
Local Time Zone Conversion from UTC Time at 12:00 UTC
November Time Zone - 1 hour 11am
Oscar Time Zone -2 hours 10 am
A
DT - Atlantic Daylight -3 hours 9 am
A
ST - Atlantic Standard
EDT - Eastern Daylight
-4 hours 8 am
EST - Eastern Standard
CDT - Central Daylight
-5 hours 7 am
CST - Central Standard
MDT - Mountain Daylight
-6 hours 6 am
MST - Mountain Standard
PDT - Pacific Daylight
-7 hours 5 am
PST - Pacific Standard
A
DT - Alaskan Daylight
-8 hours 4 am
A
LA - Alaskan Standard -9 hours 3 am
HAW - Hawaiian Standard -10 hours 2 am
Nome, Alaska -11 hours 1 am
CET - Central European
FWT - French Winter
MET - Middle European
MEWT - Middle European Winter
SWT - Swedish Winter
+1 hour 1 pm
EET - Eastern European, USSR Zone 1 +2 hours 2 pm
BT - Baghdad, USSR Zone 2 +3 hours 3 pm
ZP4 - USSR Zone 3 +4 hours 4 pm