Filter
Top Products
EKI-7657C _Manual_ed1 84
3.2.4 Security
In this section, you can configure 802.1x and MAC address table.
802.1X/Radius Configuration
802.1x is an IEEE authentication specification which prevents the client from connecting to a wireless
access point or wired switch until it provides authority, like the user name and password that are verified
by an authentication server (such as RADIUS server).
802.1X/Radius - System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this function.
•
IEEE 802.1x Protocol:
Enable or disable 802.1x protocol.
•
Radius Server IP:
Assign the RADIUS Server IP address.
•
Server Port:
Set the UDP destination port for authentication requests to the specified RADIUS Server.
•
Accounting Port:
Set the UDP destination port for accounting requests to the specified RADIUS
Server.
•
Shared Key:
Set an encryption key for using during authentication sessions with the specified
RADIUS server. This key must match the encryption key used on the RADIUS Server.
•
NAS, Identifier:
Set the identifier for the RADIUS client.
•
Click
Apply
.
Figure 3.49: 802.1x/Radius System Configuration interface
802.1x/Radius—Port Configuration
You can configure the 802.1x authentication state for each port. The state provides Disable, Accept,
Reject, and Authorize.
•
Reject:
The specified port is required to be held in the unauthorized state.
•
Accept:
The specified port is required to be held in the Authorized state.
•
Authorized:
The specified port is set to the Authorized or Unauthorized state in accordance with the
outcome of an authentication exchange between the Supplicant and the authentication server.
•
Disable:
When disabled, the specified port works without complying with 802.1x protocol.
•
Click
Apply
.