Filter
Top Products
FPM-2150 Series User Manual 20
Before installing the Windows 2000/XP driver software, you must have
the Windows 2000/XP system installed and running on your computer.
If you have an older version of the PenMount Windows 2000/XP driver
installed in your system, please remove it first. Follow the steps below to
install the PenMount Windows 2000/XP driver.
1. When the system first detects the controller board, a screen appears
that shows “Unknown Device.” Do not use this hardware wizard.
Press Cancel.
2. FPM-2150G-R
Insert the Driver CD-ROM. Go to:
\TouchScreen-DRV\Penmont 9000(resistive)\Windows 2000-XP
Driver\. Click setup.exe.
FPM-2150G-U
Insert the Driver CD-ROM. Go to:
\TouchScreen-DRV\Penmount USB\Windows Driver\. Click
setup.exe.