Advantech IPPC-9120 Laptop User Manual


 
Chapter 3 Jumper Settings and Connectors 39
cation for a special purpose, we recommend that you consult your
distributor or our sales representative for detailed information.
Table 3-10: Panel type select (SW3)
Panel type Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8
800 x 600 ON ON OFF ON ON OFF ON ON
1024 x 768
(36-bit) ON ON ON OFF ON OFF OFF ON
1024 x 768
(48-bit) ON ON ON OFF OFF OFF OFF ON
3.7 Watchdog Timer Configuration
An onboard watchdog timer reduces the chance of disruptions which
EMP (electromagnetic pulse) interference can cause. This is an
invaluable protective device for standalone or unmanned applications.
Setup involves one jumper and running the control software. (Refer to
Appendix B.)
3.7.1 Watchdog activity selection (JP7)
When the watchdog timer activates (i.e. CPU processing has come to a
halt), it can reset the system or generate an interrupt on IRQ11. This
can be set via jumper JP7 as shown below:
Table 3-11: Watchdog activity selection (JP7)
*System reset IRQ11
* default setting
1
1