Filter
Top Products
19 Chapter 2 Installation
The PCI-6872 uses the VIA "TwisterT" chip that supports 2 channel
LVDS LCD panel displays. Users can connect to LVDS LCD with CN25.
2.15.5 Panel type selection(SW1)
SW1 is an 8 segment DIP switch for DSTN/TFT panel type and resolu-
tion functions
2.16 USB connectors (CN6)
The PCI-6872 board provides up to two USB (Universal Serial Bus)
ports. This gives complete Plug and Play, and hot attach/detach for up to
127 external devices. The USB interfaces comply with USB specification
Rev. 1.1, and are fuse protected.
The USB interface is accessed through the 5 x 2-pin flat-cable connector,
CN6 (USB1, 2). You will need an adapter cable if you use a standard
Table 2.6: S1 Panel Type Select (SW1)
SW
1-1
SW
1-2
SW
1-3
SW
1-4 Panel Type & Resolution
ON ON ON ON TFT 640x480** 18bit (H. V. Freq)
ON ON ON OFF TFT 640x480 18bit (Synthetic)
ON ON OFF ON TFT 640x480** N/A
ON ON OFF OFF TFT 640x480** LVDS
ON OFF ON ON DSTN 640x480** 18bit
ON OFF ON OFF TFT 800x600** 18bit (H. V. Freq)
ON OFF OFF ON TFT 800x600 18bit (Synthetic)
ON OFF OFF OFF TFT 800x600** LVDS
OFF ON ON ON TFT 800x600** N/A
OFF ON ON OFF DSTN 800x600** 18bit
OFF ON OFF ON TFT 1024x768** 36bit (H. V. Freq)
OFF ON OFF OFF TFT 1024x768** 36bit (Synthetic)
OFF OFF ON ON TFT 1024x768** LVDS
OFF OFF ON OFF TFT 1024x768** N/A
OFF OFF OFF ON DSTN 1024x768** 18bit
OFF OFF OFF OFF DSTN 1024x768** 24bit
* Default setting
** will support in the future