Filter
Top Products
vii
18. CLASSIFICATION:
Supply Class I adapter
No applied part
IPX1
Continuous Operation
Not AP or APG category
19. Disconnect device: Appliance inlet.
20. Follow the national requirement to dispose unit.
21. Maintenance: to properly maintain and clean the surfaces, use only
the approved products or clean with a dry applicator.
22. Contact information:
No.1, Alley 20, Lane 26, Reuiguang Road Neihu District, Taipei,
Taiwan 114, R.O.C.
TEL: (02)27927818
23.
23. This equipment shall not be used for life support system.
24. Accessory equipment connected to the analog and digital interfaces
must be in compliance with the respective nationally harmonized
IEC standards (i.e. IEC 60950 for data processing equipment, IEC
60065 for video equipment, IEC 61010-1 for laboratory equipment,
and IEC 60601-1 for medical equipment.) Furthermore all configu-
rations shall comply with the system standard IEC 60601-1-1.
Everybody who connects additional equipment to the signal input
part or signal output part configures a medical system, and is there-
fore, responsible that the system complies with the requirements of
the system standard IEC 60601-1-1. The unit is for exclusive inter-
connection with IEC 60601-1 certified equipment in the patient
environment and IEC 60XXX certified equipment outside of the
patient environment. If in doubt, consult the technical services
department or your local representative.
25. User not to contact SIP/SOPs and the patient at the same time.