Filter
Top Products
17
• If you decide to use IP address from Wireless Router, select “Obtain an IP
address automatically”.
• If you decide to use the IP address you are desired, select “Use the following
IP address”. Make sure enter correct addresses in “IP Address” and “Subnet
Mask” fields.
• You must set Wireless Router’s IP address as “Default Gateway”.
• If the DNS Server fields are empty, select “Use the following DNS server
addresses” and enter the DNS address is provided by your ISP, then click
“OK”.
2.2 Setting up Internet Access
This section describes how to setup Wireless Router Internet access through DSL or
cable modem.
For Windows 9x/2000
a) Click “Start” and select “Settings Æ Control Panel Æ Internet Options”.
b) Select “Connection” tab then click “Setup” button.
c) Select “I want to set up my Internet connection manually, or I want to connect
through a local area network (LAN)” then click “Next”.